Single Lever Basin Mixer – Chrome

Product Code

OPP-CHR-15011BPM

Description

Single Lever Basin Mixer without Popup Waste with 450mm Long Braided Hoses

Connection Size

Braided hoses, 1/2″ FIP (WRAS Approved), Withstand pressure of 10 Bar

Flow Rate

14.70 LPM @ 3 bar

Flow Regulator

By using flow regulators (Product should be ordered with suffix as G-2.5 LPM, GA-6.0 LPM, GB-8.0 LPM, GD-3.8 LPM & GE-1.3 LPM @ 3.0 Bar pressure) one can regulate the flow rate.

Recommended Water Pressure

0.5 Bar – 5 Bar

Brass Specification in Percentage

• Brass Ingots as per IS:1264-1997: Cu (58.0-63.0), Sn (0.0-1.0), Pb (0.5-2.5), Ni (0.0-1.0), Al (0.2-0.8), Mn (0.0-0.5), Total Impurity (0.0-2.0), Zn (Remainder)
• Brass Rod as per IS:319-1989: Cu (56.0-59.0), Pb (2.0-3.5), Fe (0.0-0.35), Total Impurity (0.0-0.7), Zn (Remainder)
• Brass Sheets as per IS:410-1977: Cu (61.5-64.5), Pb (0.0-0.3), Fe (0.0-0.075), Total Impurity (0.0-0.6), Zn (Remainder)

Cartridge Specification

• Cartridge with Temperature Limiter
• Cartridge with Brass Spindle
• Life Cycle EN 817: 70,000 cycles (Standard) – 2.1 LAC Cycles as per EN 817* – 10.5 LAC Cycles (ON/OFF)*
• Water Tightness: 16 bar (Pass)
• Pressure Resistance: 25 bar (Pass)

Finish

Plating: Nickel – 10.0 micron, Chromium – 0.3 micron

Salt Spray: 500 hrs + (Validated)

Adhesion: Pass

Aerator Size: WRAS, ACS Approved (24X1)

Available Colour Finishing

Antique Bronze (ABR), Antique Copper (ACR), Black Chrome (BCH), Blush Gold Bright PVD (BGP), Black Matt (BLM), Gold Bright PVD (GBP), Gold Dust (GDS), Auric Gold (GLD), Gold Matt PVD (GMP), Graphite (GRF), Stainless Steel (SSF) & White Matt (WHM)

Disclaimer

Our every effort has been made to ensure factual accuracy; the information presented is subject to changes due to requirements in different sites, markets and/or countries. 10% variation in flow rate may be possible. Jaquar reserves the right to make the necessary amendments at any time without prior notice.