Description
Product Code
FLR-CHR-5047N
Description
Bib Tap (Straight Line Model) with Wall Flange
Flow Rate
17.80 LPM @ 3 bar
Flow Regulator
By using flow regulators (Product should be ordered with suffix as G-2.5 LPM, GA-6.0 LPM, GB-8.0 LPM, GC-13.0 LPM, GD-3.8 LPM & GE-1.3 LPM @ 3.0 Bar pressure) one can regulate the flow rate.
Recommended Water Pressure
0.5 Bar – 5 Bar
Brass Specification in Percentage
- Brass Ingots as per IS:1264-1997: Cu (58.0-63.0), Sn (0.0-1.0), Pb (0.5-2.5), Ni (0.0-1.0), Al (0.2-0.8), Mn (0.0-0.5), Total Impurity (0.0-2.0), Zn (Remainder)
- Brass Rod as per IS:319-1989: Cu (56.0-59.0), Pb (2.0-3.5), Fe (0.0-0.35), Total Impurity (0.0-0.7), Zn (Remainder)
- Brass Sheets as per IS:410-1977: Cu (61.5-64.5), Pb (0.0-0.3), Fe (0.0-0.075), Total Impurity (0.0-0.6), Zn (Remainder)
Cartridge Specification
- Fittings: Components have WRAS Approved for food grade conformity with Brass Housing and Spindle
- Life Cycle EN 200: 200,000 cycles (Standard) – 0.5 million Cycles as per EN 200*
- Water Tightness: 16 bar (Pass)
- Pressure Resistance: 25 bar (Pass)
Finish
- Plating: Nickel-10.0 micron Chromium-0.3 micron
- Salt Spray: 500 hrs + (Validated)
- Adhesion: Pass
- Aerator Size: WRAS, ACS Approved (24X1)
Available Colour Finishing
CHROME (CHR)
* As per in-house testing done on automatic life cycle testing machine made by Giussain, Italy
DISCLAIMER: Our every effort has been made to ensure factual accuracy, the information presented is subject to changes
due to requirements in different sites, markets and/or countries. 10% variation in flow rate may be possible. Jaquar
reserves the right to make the necessary amendments at any time without prior notice.
Reviews
There are no reviews yet.